Pour Over Coffee maker/dripper.
The coffee maker measures 3" wide, 9” tall and 7.5" deep. The stand weighs approximately 3.5 pounds.
The funnel ring is 3”
**Glass funnel not included. Travel mug is not included
This single cup pour over set makes an exceptionally fast and fresh brew that accentuates the individual flavors of your coffee. The cone/funnel rests on a heavy duty industrial black pipe stand. The base and stand are made with a combination of black pipe and silver ring cup holder. Crafted with the best combination of design and function in mind, the coffee pour over stand connects coffee lovers to the best-in-class tools that make for memorable coffee experiences and of course a unique conversation piece for your kitchen.
To brew coffee with the pour over system, first bring at least 6 ounces of water to a boil and pour over the filter (in the glass funnel) to pre-wet the filter. Make sure you have a coffee cup/mug under the funnel on the cup/mug base. Discard the water in the cup/mug after wetting the filter. Place the coffee grounds in the filter. Pour about 6 ounces of water over the coffee slowly using a spoon to make sure the grounds are wet and in solution. Continue adding water in even intervals until all water is emptied into glass funnel and let it drain into coffee cup. The brewing should take approximately two minutes and the variation should be done with the grind size and not quantity. If the cup seems watery and weak try a finer grind. If it takes too long to brew, use a coarser grind.
Coffee cup/mug and filters not included with purchase.NOTE: Pipe threads will show a little bit and therefore will not screw in all of the way. That’s how they’re made (slightly tapered pipe threading).
I will begin processing your order once I receive full payment. Most of our made to order items will be produced and shipped within 1-3 business days. The craft supplies and "DIY" items will be shipped within three business days of payment. My main goal is to complete the items and ship your items as soon as possible.
Please let me know if it is a rush order and I’ll try to accommodate your request.
You may pay for your order with the multitude of ETSY payment options.
Shipping from United States
Once your payment is processed most of the products will ship within 1-3 business days unless otherwise noted in the listing shipping details.
We will typically ship UPS ground for shipping.
Unfortunately we do not deliver to P.O. Box addresses.
Please note: For the longer table legs and for large orders I often ship them in separate boxes due to the length and weight of the pipes and fittings. I will keep you updated if the boxes are not scheduled to arrive on the same day.
At this time we do not ship to Hawaii or Alaska due to high cost of shipping for the heavy iron pipes.
Please report any damaged packages to me as soon as possible so I can address the issue immediately with the shipping service.
If you have any questions at any time please message me. I will respond promptly.
Returns & Exchanges
I gladly accept returns, exchanges, and cancellations
Just contact me within: 3 days of delivery
Ship items back to me within: 14 days of delivery
Request a cancellation within: 2 hours of purchase
But please contact me if you have any problems with your order.
Questions about your order?
Please contact me if you have any problems with your order.
Returns and exchange details
Returns will be accepted within 14 business days of delivery for a full refund unless they are custom orders (see above policy for custom orders).
I will issue a full 100% refund for a purchase that you are unhappy with or that is damaged in any way. Please return items in new condition (no damage or alterations) to qualify for a refund. Unfortunately damaged items can not be resold by me as new so I cannot accept them in damaged condition.
Any custom made order (custom size cut pipe items included) will not be accepted for a refund. I will make every effort to facilitate a satisfactory transaction.
I do require the buyer pay for the return shipping and please return item/s in the condition they were shipped.
No returns will be accepted after 14 days.
All sales are final on Custom orders.
All custom orders will be considered and we can send you an estimate for your request.
For custom size table frames please include the pipe diameter size you wish to use (1/2", 3/4", or 1" currently available), length of table top, width of top, and desired table top height (minus the thickness of your top).
"Black pipe" is the construction industry name used for this type of piping. It is dark in color (not black but a more dark gray color) unpainted steel like what is used in construction projects. Since the pipes and fittings are raw steel and iron the color may not be uniform and can contain slight imperfections that add character to the design of the product.
This is typically what is often used and desirable for authentic industrial decor and interior design. The "black pipe" is paintable.
**Please Note: The unpainted black pipe can have some imperfections and the pipe coloring can differ slightly from the pipe and fittings.
I recommend that you do not clean the iron pipes with water. The pipes and fittings will rust.
All "DIY" parts kits will need to be cleaned prior to assembling. I recommend using a degreasing formula (ZEP 505 in the spray bottle from Home Depot) works very well.
I will email detailed instructions for the "DIY" supplies/kits by request. I prefer not to use paper instructions if at all possible. Thank you, Tom
Frequently Asked Questions
The straight shelf brackets are listed by the length of the pipe. Once the pipe, mounting flange and end cap are installed the space where the shelf will rest will measure 3/4" - 1" shorter so for example, if you purchase 8" shelf brackets they will actually measure 7"-7-1/4" depending how tightly you screw the pipes together (for your shelf to rest on).
Is the black pipe painted?
"Black pipe" is the construction industry name used for this type of piping. It is dark in color (not black but a more dark gray color) unpainted steel like what is used in construction projects. This is typically what is often used in authentic industrial decor and interior design. The "black pipe" is paintable.
The black pipe "DIY" items are delivered as a parts kit and need to be cleaned (please read the listing product description). They have a thin coating to protect the pipe from scratching during shipping/delivery. I like to use A degreaser from Home Depot like ZEP 505 or a similar product in the spray bottle. Simply spray on the pipe and wipe off. Repeat this a few times to be sure all of the remaining coating is clean.
Custom and personalized orders
Many of our products are customizable including the shelving units and table base frames. If you have an idea for one of these items message me with your idea and include as many details as possible (with a sketch or photo example if you have one). Typically I can give you a quote for a table frame if I have the desired pipe diameter (1/2", 3/4", or 1"), length, width/depth, and height.
For shelving units I will need height (from ceiling to the bottom of the unit), shelf depth, space in between each shelf (in inches), number of shelves you want and the diameter size of pipe (1/2", 3/4", or 1" available).